Power supplies with 60 VDC output voltage

Here you will find 60V power supplies with different technologies from FEAS. Choose between unregulated (filtered / smoothed) 60V power supplies or 60V switching power supplies (SMPS). Buy power supply units with a top hat rail or power supply units with an extremely high degree of protection due to cable connetion.
Made in Germany: All power supplies are developed and manufactured in our factory in Ahrensburg.

The AC mains voltage is transformed by a transformer to the appropriate rectifier input voltage, which is then filtered and smoothed using an electrolytic capacitor. The output voltage may vary slightly depending on the AC input voltage and DC load. The construction of these 60V power supplies is robust and limited to the essentials. These 60V power supply units are sufficient for controlling valves, relays, contactors and Manget switches and for most PLC controls.

The 60V switched-mode power supply also converts the mains voltage into a regulated 60VDC output voltage, but has a higher efficiency and a smaller size. After filtering and rectification, the AC input voltage is converted into a high-frequency, wave-like pulsating voltage using a pulse-width modulated semiconductor switch and transformed into the required 48V voltage on the secondary side by using a transformer. It is then rectified and filtered again. The higher-performance power supply units are all equipped with Power Factor Correction (PFC).