Buffer module SSE1205

[FEAS article number: 621205]

Price per unit: 189.80 €

commercial customers acc. to § 14 BGB only
16 % VAT plus., ex-factory price

Please use the SSE-buffer-modules in order to buffer load currents during line voltage faults, peak loads or switching operations.
Therefore the buffer module can be connected directly in parallel to the regulated DC circuit or can be used for the selective protection of critical consumers.
Through this, interferences at controls, caused by short blackouts, can be avoided and the failure probability of the system can be reduced effective.
  • DC buffer module for 12 VDC systems
  • Extra low safety potential
  • Overload- and open circuit protected
  • Short circuit proof
  • Parallel connection possible
  • No accumulator - maintenance-free
  • Operating status shown by LED
  • Relay for remote monitoring the supply voltage
  • Suitable for the tropics - epoxy resin casted
  • Safety acc. to VDE, EN, UL, CSA
Buffer module SSE1205
Stored energy: 0.45 Wh / 1.62 kJ
Input voltage (VDC): 11.5 - 18.0 VDC
Charging current: 1.3 Amp.
Buffered voltage: 11.0 VDC
max. Output current: 20.0 Amp.
Residual ripple: < 50mVrms
Operating temperature range: -30°C / +80°C
Dimensions (WxHxD): 64.0 x 100.0 x 120.0 mm
Weight: 1.4 kg
Mounting: On rails acc. to DIN 46277 or wall mounting with screws
Data sheet SSE1205 (476.68 KB)

Technical data for buffer module SSE1205

Open/download file
Manual SSE05 (852.08 KB)

Operating instructions for buffer moduls of the series SSE05

Open/download file
Product specification SSE1205 (405.69 KB)

Further information about buffer module SSE1205

Open/download file
from 1 pcs. 3 pcs. 5 pcs. 10 pcs. 20 pcs. 50 pcs.
Discount 0 % 2 % 5 % 8 % 12 % 15 %
Price per unit 189.80 € 186.00 € 180.31 € 174.62 € 167.02 € 161.33 €

To enlarge please click the desired image
available from stock
  Send question to article...